Last Updated on
So you’ve been putting off that DIY woodworking project for quite some time now, right?
You may be feeling like it just simply takes too long to complete with the wrong equipment. Ah reader, we’ve most definitely been there before!
Thankfully there is a solution: a plunge saw.
A plunge saw is an important tool for a woodworker, and they can save a lot of time when you’re working on your project. The only problem is that the market is saturated with so many of them that it can simply get too overwhelming to choose which one is right for you.
We’re here to help make the task of finding the right plunge saw so much easier for you, with our handy ranking and buyers guide here to guide the way.
In a hurry? Cut straight through to our top pick!
In a hurry? This is our winner!
Best Plunge Saw – Comparison Table
Best Plunge Saw – Reviews
Best Plunge Saw – Buyer’s Guide
Why buy a plunge saw?
Plunge saws usually come with a track that helps you to be able to make the alignment of your cuts precise without you having to make a random guess. In order to properly use the track all you have to do is properly align the track with the mark before making your cut.
This will ensure your cut is nice and straight, and occasionally this feature can help to reduce the frequency of taking measurements.
When you’re trying to compare a circular saw and a plunge saw, a plunge saw makes sharper, cleaner cuts. You won’t have any problems with chip bits if you’re going to be cutting materials like solid wood, MDF and plywood.
There are a lot of different track lengths for plunge saws available. Some of them can even be as long as 144 cm in length. The end of the tracks are usually in squares which can be helpful when you’re trying to connect a couple of different tracks.
If you’re not interested in getting a long plunge saw then you can use a connector to make long cuts.
Easy to Carry
Plunge saws are fairly lightweight and small, so you could put them in the back of a work van without any problem. It can be run using only one hand and you just have to put the tracks underneath your arm. They don’t take up a lot of space for storage easier, so they can be put in a shed quite easily.
Plunge saws tend to have non slip rubber strips on their base in order to help keep you safe. You won’t need to worry about clamping any equipment with this.
Things to Consider
When on the hunt for the ultimate plunge saw, there are a few things to consider and keep in mind. Some things to look out for include bevel capacity, maximum speed, motor power among other things. So, without further ado, here are some things to keep in mind when purchasing your plunge saw.
Plunge saw speed is measured in something called revolutions per minute, or RPM for short. This measurement will help you to figure out what kind of things the saw is able to cut through. A smaller RPM means that it is harder to cut through some of the thicker materials.
Plunge saws are pretty well rounded, but in order to cut through things with no issues you should opt for a model with a high RPM. The majority of models tend to come with 2000 RPM but some of them can even go up to as much as 5000.
The majority of saws even come with the ability to control the speed which is an especially useful feature worth considering. If you are able to control the speed of the saw it can help you to manage the cut so you can move the saw if you need to. It will also allow you to be able to saw through much thicker materials.
What is a bevel? Simply put, it’s the angle that your saw is able to cut at. Lower end, basic models tend to only do straight cuts or 90 degree angles, whereas if your saw has a bevel adjuster then you will be able to undertake more diverse projects.
In addition, you won’t need as many saws so your projects will be a lot easier to complete, and it will be faster for you too.
You will need your saw to have enough power to be able to withstand the kind of projects that you’re doing, much like with any other tool you may buy. 9 amp motors tend to be more than sufficient for the majority of woodworkers.
This factor should be the top of your priority list when you’re looking to buy a saw. You’re looking at a massive spike in price if your motor has a higher amp than 9.
It could be a good option for you to get a more powerful saw if you’re planning on using it for a lot of big projects and you’re going to be using it a lot.
Cordless vs Corded
The vast majority of people that buy plunge saws actually don’t consider the length of the cord when they’re buying. For the most part people will use their saws inside of a house, and it can cause a lot of problems to run out of cord in the middle of a project.
14 foot cords are quite commonplace when it comes to plunge saws, but the majority only come with an 8 foot cord. If you are worried about running short on cord when you’re in the middle of a project and you’re not concerned about spending more money then it’s worth looking at investing in a cordless model.
Cordless models don’t have the same issues that corded models do as far as where you can use them is concerned, but there are some negative aspects to consider. You will need to constantly make sure that it’s properly charged before you embark on a project to start, and you may even need to replace the battery after a couple of years. All of this depends on the frequency that it’s used though.
Not all plunge saws are built to stand the test of time, though some certainly are. Your saw may be the most expensive model on the market but that doesn’t mean that it’s going to last very long. You need to ensure that both the tool as a whole and the blades that it uses are strong and durable.
It is possible that you will need to sharpen or replace the tool at least once, but at the same time you shouldn’t have to constantly replace and sharpen it. Try to go with a reputable brand that is known for durability.
You should try to ensure that the saw you choose has a dust system, as this can help to make cleaning up much easier. The shroud will assist with this but a dust system takes it up a notch. You won’t need to clean as much if there is less dust floating around the project.
With some saws there is even a choice to attach a hose to it from a vacuum.
Length of Track
This is something that is different with every saw and it is what decides how long your cut is going to be. It’s possible to buy extensions for the track if necessary but you should still make sure that it’s going to work in addition to the guard rail, as this is what will keep the cut straight and on the right track.
When you buy your plunge saw, you should ensure that the blades that come with it are of premium quality. In addition to this, it’s worth considering an option where the blade can be replaced easily. If you’re in a situation where you need to replace your blade it’s often a lot more convenient to be able to go to your local store to buy a new one rather than waiting for an online delivery.
While buying a blade online saves you a lot of time as you aren’t going to the store, you’ll likely still have to search for a specific blade and then spend time waiting for it to ship out to you.
Frequently Asked Questions
Can I use a plunge saw as a replacement for a table saw?
People are very fond of plunge saws as they are very portable and give smooth cuts. The functions between the two can be quite similar, for instance it’s possible to cut large sheets of material for both.
Plunge saws can’t do everything that table saws can, however. For example, plunge saws are not ideal for cutting small pieces of wood, while table saws are quite efficient at doing this.
Plunge saws will also make cuts that are smaller than 2 inches in width, so they’re not convenient for cutting things into similar sizes. As a rule, table saws can be fantastic to make miter cuts and cross cuts.
If you’re cutting full size sheets however, plunge saws are ideal.